Jump to content

Ligand

From Wikipedia, the free encyclopedia
(Redirected from Ambidentate ligand)

Cobalt complex HCo(CO)4 with five ligands

In coordination chemistry, a ligand[a] is an ion or molecule with a functional group that binds to a central metal atom to form a coordination complex. The bonding with the metal generally involves formal donation of one or more of the ligand's electron pairs, often through Lewis bases.[1] The nature of metal–ligand bonding can range from covalent to ionic. Furthermore, the metal–ligand bond order can range from one to three. Ligands are viewed as Lewis bases, although rare cases are known to involve Lewis acidic "ligands".[2][3]

Metals and metalloids are bound to ligands in almost all circumstances, although gaseous "naked" metal ions can be generated in a high vacuum. Ligands in a complex dictate the reactivity of the central atom, including ligand substitution rates, the reactivity of the ligands themselves, and redox. Ligand selection requires critical consideration in many practical areas, including bioinorganic and medicinal chemistry, homogeneous catalysis, and environmental chemistry.

Ligands are classified in many ways, including: charge, size (bulk), the identity of the coordinating atom(s), and the number of electrons donated to the metal (denticity or hapticity). The size of a ligand is indicated by its cone angle.

History

[edit]

The composition of coordination complexes have been known since the early 1800s, such as Prussian blue and copper vitriol. The key breakthrough occurred when Alfred Werner reconciled formulas and isomers. He showed, among other things, that the formulas of many cobalt(III) and chromium(III) compounds can be understood if the metal has six ligands in an octahedral geometry. The first to use the term "ligand" were Alfred Werner and Carl Somiesky, in relation to silicon chemistry. The theory allows one to understand the difference between coordinated and ionic chloride in the cobalt ammine chlorides and to explain many of the previously inexplicable isomers. He resolved the first coordination complex called hexol into optical isomers, overthrowing the theory that chirality was necessarily associated with carbon compounds.[4][5]

Strong field and weak field ligands

[edit]

In general, ligands are viewed as electron donors and the metals as electron acceptors, i.e., respectively, Lewis bases and Lewis acids. This description has been semi-quantified in many ways, e.g. ECW model. Bonding is often described using the formalisms of molecular orbital theory.[6][7]

Ligands and metal ions can be ordered in many ways; one ranking system focuses on ligand 'hardness' (see also hard/soft acid/base theory). Metal ions preferentially bind certain ligands. In general, 'hard' metal ions prefer weak field ligands, whereas 'soft' metal ions prefer strong field ligands. According to the molecular orbital theory, the HOMO (Highest Occupied Molecular Orbital) of the ligand should have an energy that overlaps with the LUMO (Lowest Unoccupied Molecular Orbital) of the metal preferential. Metal ions bound to strong-field ligands follow the Aufbau principle, whereas complexes bound to weak-field ligands follow Hund's rule.

Binding of the metal with the ligands results in a set of molecular orbitals, where the metal can be identified with a new HOMO and LUMO (the orbitals defining the properties and reactivity of the resulting complex) and a certain ordering of the 5 d-orbitals (which may be filled, or partially filled with electrons). In an octahedral environment, the 5 otherwise degenerate d-orbitals split in sets of 3 and 2 orbitals (for a more in-depth explanation, see crystal field theory):

  • 3 orbitals of low energy: dxy, dxz and dyz and
  • 2 orbitals of high energy: dz2 and dx2y2.

The energy difference between these 2 sets of d-orbitals is called the splitting parameter, Δo. The magnitude of Δo is determined by the field-strength of the ligand: strong field ligands, by definition, increase Δo more than weak field ligands. Ligands can now be sorted according to the magnitude of Δo (see the table below). This ordering of ligands is almost invariable for all metal ions and is called spectrochemical series.

For complexes with a tetrahedral surrounding, the d-orbitals again split into two sets, but this time in reverse order:

  • 2 orbitals of low energy: dz2 and dx2y2 and
  • 3 orbitals of high energy: dxy, dxz and dyz.

The energy difference between these 2 sets of d-orbitals is now called Δt. The magnitude of Δt is smaller than for Δo, because in a tetrahedral complex only 4 ligands influence the d-orbitals, whereas in an octahedral complex the d-orbitals are influenced by 6 ligands. When the coordination number is neither octahedral nor tetrahedral, the splitting becomes correspondingly more complex. For the purposes of ranking ligands, however, the properties of the octahedral complexes and the resulting Δo has been of primary interest.

The arrangement of the d-orbitals on the central atom (as determined by the 'strength' of the ligand), has a strong effect on virtually all the properties of the resulting complexes. E.g., the energy differences in the d-orbitals has a strong effect in the optical absorption spectra of metal complexes. It turns out that valence electrons occupying orbitals with significant 3 d-orbital character absorb in the 400–800 nm region of the spectrum (UV–visible range). The absorption of light (what we perceive as the color) by these electrons (that is, excitation of electrons from one orbital to another orbital under influence of light) can be correlated to the ground state of the metal complex, which reflects the bonding properties of the ligands. The relative change in (relative) energy of the d-orbitals as a function of the field-strength of the ligands is described in Tanabe–Sugano diagrams.

In cases where the ligand has low energy LUMO, such orbitals also participate in the bonding. The metal–ligand bond can be further stabilised by a formal donation of electron density back to the ligand in a process known as back-bonding. In this case a filled, central-atom-based orbital donates density into the LUMO of the (coordinated) ligand. Carbon monoxide is the preeminent example a ligand that engages metals via back-donation. Complementarily, ligands with low-energy filled orbitals of pi-symmetry can serve as pi-donor.

Metal–EDTA complex, wherein the aminocarboxylate is a hexadentate (chelating) ligand
Cobalt(III) complex containing six ammonia ligands, which are monodentate. The chloride is not a ligand.

Classification of ligands as L and X

[edit]

Ligands are classified according to the number of electrons that they "donate" to the metal. L ligands are Lewis bases. L ligands are represented by amines, phosphines, CO, N2, and alkenes. Examples of L ligands extend to include dihydrogen and hydrocarbons that interact by agostic interactions. X ligands are halides and pseudohalides. X ligands typically are derived from anionic precursors such as chloride but includes ligands where salts of anion do not really exist such as hydride and alkyl.[8][9]

Especially in the area of organometallic chemistry, ligands are classified according to the "CBC Method" for Covalent Bond Classification, as popularized by M. L. H. Green and "is based on the notion that there are three basic types [of ligands]... represented by the symbols L, X, and Z, which correspond respectively to 2-electron, 1-electron and 0-electron neutral ligands."[10][11]

Polydentate and polyhapto ligand motifs and nomenclature

[edit]

Denticity

[edit]

Many ligands are capable of binding metal ions through multiple sites, usually because the ligands have lone pairs on more than one atom. Such ligands are polydentate.[12] Ligands that bind via more than one atom are often termed chelating. A ligand that binds through two sites is classified as bidentate, and three sites as tridentate. The "bite angle" refers to the angle between the two bonds of a bidentate chelate. Chelating ligands are commonly formed by linking donor groups via organic linkers. A classic bidentate ligand is ethylenediamine, which is derived by the linking of two ammonia groups with an ethylene (−CH2CH2−) linker. A classic example of a polydentate ligand is the hexadentate chelating agent EDTA, which is able to bond through six sites, completely surrounding some metals. The number of times a polydentate ligand binds to a metal centre is symbolized by "κn", where n indicates the number of sites by which a ligand attaches to a metal. EDTA4−, when it is hexidentate, binds as a κ6-ligand, the amines and the carboxylate oxygen atoms are not contiguous. In practice, the n value of a ligand is not indicated explicitly but rather assumed. The binding affinity of a chelating system depends on the chelating angle or bite angle.

Denticity (represented by κ) is nomenclature that described to the number of noncontiguous atoms of a ligand bonded to a metal. This descriptor is often omitted because the denticity of a ligand is often obvious. The complex tris(ethylenediamine)cobalt(III) could be described as [Co(κ2-en)3]3+.

Complexes of polydentate ligands are called chelate complexes. They tend to be more stable than complexes derived from monodentate ligands. This enhanced stability, called the chelate effect, is usually attributed to effects of entropy, which favors the displacement of many ligands by one polydentate ligand.

Related to the chelate effect is the macrocyclic effect. A macrocyclic ligand is any large ligand that at least partially surrounds the central atom and bonds to it, leaving the central atom at the centre of a large ring. The more rigid and the higher its denticity, the more inert will be the macrocyclic complex. Heme is an example, in which the iron atom is at the centre of a porphyrin macrocycle, bound to four nitrogen atoms of the tetrapyrrole macrocycle. The very stable dimethylglyoximate complex of nickel is a synthetic macrocycle derived from dimethylglyoxime.

Hapticity

[edit]

Hapticity (represented by Greek letter η) refers to the number of contiguous atoms that comprise a donor site and attach to a metal center. The η-notation applies when multiple atoms are coordinated. For example, η2 is a ligand that coordinates through two contiguous atoms. Butadiene forms both η2 and η4 complexes depending on the number of carbon atoms that are bonded to the metal.[13][14][15]

Ligand motifs

[edit]

Trans-spanning ligands

[edit]

Trans-spanning ligands are bidentate ligands that can span coordination positions on opposite sides of a coordination complex.[16]

Ambidentate ligand

[edit]

In contrast to polydentate ligands, ambidentate ligands can attach to the central atom in either one of two (or more) places, but not both. An example is thiocyanate, SCN, which can attach at either the sulfur atom or the nitrogen atom. Such compounds give rise to linkage isomerism.

Polydentate and ambidentate are therefore two different types of polyfunctional ligands (ligands with more than one functional group) which can bond to a metal center through different ligand atoms to form various isomers. Polydentate ligands can bond through one atom AND another (or several others) at the same time, whereas ambidentate ligands bond through one atom OR another. Proteins are complex examples of polyfunctional ligands, usually polydentate.

Bridging ligand

[edit]

A bridging ligand links two or more metal centers. Virtually all inorganic solids with simple formulas are coordination polymers, consisting of metal ion centres linked by bridging ligands. This group of materials includes all anhydrous binary metal ion halides and pseudohalides. Bridging ligands also persist in solution. Polyatomic ligands such as carbonate are ambidentate and thus are found to often bind to two or three metals simultaneously. Atoms that bridge metals are sometimes indicated with the prefix "μ". Most inorganic solids are polymers by virtue of the presence of multiple bridging ligands. Bridging ligands, capable of coordinating multiple metal ions, have been attracting considerable interest because of their potential use as building blocks for the fabrication of functional multimetallic assemblies.[17]

Binucleating ligand

[edit]

Binucleating ligands bind two metal ions.[18] Usually binucleating ligands feature bridging ligands, such as phenoxide, pyrazolate, or pyrazine, as well as other donor groups that bind to only one of the two metal ions.

Metal–ligand multiple bond

[edit]

Some ligands can bond to a metal center through the same atom but with a different number of lone pairs. The bond order of the metal ligand bond can be in part distinguished through the metal ligand bond angle (M−X−R). This bond angle is often referred to as being linear or bent with further discussion concerning the degree to which the angle is bent. For example, an imido ligand in the ionic form has three lone pairs. One lone pair is used as a sigma X donor, the other two lone pairs are available as L-type pi donors. If both lone pairs are used in pi bonds then the M−N−R geometry is linear. However, if one or both these lone pairs is nonbonding then the M−N−R bond is bent and the extent of the bend speaks to how much pi bonding there may be. η1-Nitric oxide can coordinate to a metal center in linear or bent manner.

Spectator ligand

[edit]

A spectator ligand is a tightly coordinating polydentate ligand that does not participate in chemical reactions but removes active sites on a metal. Spectator ligands influence the reactivity of the metal center to which they are bound.

Bulky ligands

[edit]

Bulky ligands are used to control the steric properties of a metal center. They are used for many reasons, both practical and academic. On the practical side, they influence the selectivity of metal catalysts, e.g., in hydroformylation. Of academic interest, bulky ligands stabilize unusual coordination sites, e.g., reactive coligands or low coordination numbers. Often bulky ligands are employed to simulate the steric protection afforded by proteins to metal-containing active sites. Of course excessive steric bulk can prevent the coordination of certain ligands.

The N-heterocyclic carbene ligand called IMes is a bulky ligand by virtue of the pair of mesityl groups.

Chiral ligands

[edit]

Chiral ligands are useful for inducing asymmetry within the coordination sphere. Often the ligand is employed as an optically pure group. In some cases, such as secondary amines, the asymmetry arises upon coordination. Chiral ligands are used in homogeneous catalysis, such as asymmetric hydrogenation.

Hemilabile ligands

[edit]

Hemilabile ligands contain at least two electronically different coordinating groups and form complexes where one of these is easily displaced from the metal center while the other remains firmly bound, a behaviour which has been found to increase the reactivity of catalysts when compared to the use of more traditional ligands.

Non-innocent ligand

[edit]

Non-innocent ligands bond with metals in such a manner that the distribution of electron density between the metal center and ligand is unclear. Describing the bonding of non-innocent ligands often involves writing multiple resonance forms that have partial contributions to the overall state.

Common ligands

[edit]

Virtually every molecule and every ion can serve as a ligand for (or "coordinate to") metals. Monodentate ligands include virtually all anions and all simple Lewis bases. Thus, the halides and pseudohalides are important anionic ligands whereas ammonia, carbon monoxide, and water are particularly common charge-neutral ligands. Simple organic species are also very common, be they anionic (RO and RCO
2
) or neutral (R2O, R2S, R3−xNHx, and R3P). The steric properties of some ligands are evaluated in terms of their cone angles.

Beyond the classical Lewis bases and anions, all unsaturated molecules are also ligands, utilizing their pi electrons in forming the coordinate bond. Also, metals can bind to the σ bonds in for example silanes, hydrocarbons, and dihydrogen (see also: Agostic interaction).

In complexes of non-innocent ligands, the ligand is bonded to metals via conventional bonds, but the ligand is also redox-active.

Examples of common ligands (by field strength)

[edit]

In the following table the ligands are sorted by field strength[citation needed] (weak field ligands first):

Ligand formula (bonding atom(s) in bold) Charge Most common denticity Remark(s)
Iodide (iodo) I monoanionic monodentate
Bromide (bromido) Br monoanionic monodentate
Sulfide (thio or less commonly "bridging thiolate") S2− dianionic monodentate (M=S), or bidentate bridging (M−S−M')
Thiocyanate (S-thiocyanato) S−CN monoanionic monodentate ambidentate (see also isothiocyanate, below)
Chloride (chlorido) Cl monoanionic monodentate also found bridging
Nitrate (nitrato) ONO
2
monoanionic monodentate
Azide (azido) NN
2
monoanionic monodentate Very Toxic
Fluoride (fluoro) F monoanionic monodentate
Hydroxide (hydroxido) O−H monoanionic monodentate often found as a bridging ligand
Oxalate (oxalato) [O−CO−CO−O]2− dianionic bidentate
Water (aqua) O−H2 neutral monodentate
Nitrite (nitrito) O−N−O monoanionic monodentate ambidentate (see also nitro)
Isothiocyanate (isothiocyanato) N=C=S monoanionic monodentate ambidentate (see also thiocyanate, above)
Acetonitrile (acetonitrilo) CH3CN neutral monodentate
Pyridine (py) C5H5N neutral monodentate
Ammonia (ammine or less commonly "ammino") NH3 neutral monodentate
Ethylenediamine (en) NH2−CH2−CH2NH2 neutral bidentate
2,2'-Bipyridine (bipy) NC5H4−C5H4N neutral bidentate easily reduced to its (radical) anion or even to its dianion
1,10-Phenanthroline (phen) C12H8N2 neutral bidentate
Nitrite (nitro) NO
2
monoanionic monodentate ambidentate (see also nitrito)
Triphenylphosphine P−(C6H5)3 neutral monodentate
Cyanide (cyano) C≡N
N≡C
monoanionic monodentate can bridge between metals (both metals bound to C, or one to C and one to N)
Carbon monoxide (carbonyl) CO, others neutral monodentate can bridge between metals (both metals bound to C)

The entries in the table are sorted by field strength, binding through the stated atom (i.e. as a terminal ligand). The 'strength' of the ligand changes when the ligand binds in an alternative binding mode (e.g., when it bridges between metals) or when the conformation of the ligand gets distorted (e.g., a linear ligand that is forced through steric interactions to bind in a nonlinear fashion).

Other generally encountered ligands (alphabetical)

[edit]

In this table other common ligands are listed in alphabetical order.

Ligand Formula (bonding atom(s) in bold) Charge Most common denticity Remark(s)
Acetylacetonate (acac) CH3−CO−CH2−CO−CH3 monoanionic bidentate In general bidentate, bound through both oxygens, but sometimes bound through the central carbon only,
see also analogous ketimine analogues
Alkenes R2C=CR2 neutral compounds with a C−C double bond
Aminopolycarboxylic acids (APCAs)        
BAPTA (1,2-bis(o-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid)        
Benzene C6H6 neutral and other arenes
1,2-Bis(diphenylphosphino)ethane (dppe) (C6H5)2P−C2H4P(C6H5)2 neutral bidentate
1,1-Bis(diphenylphosphino)methane (dppm) (C6H5)2P−CH2P(C6H5)2 neutral Can bond to two metal atoms at once, forming dimers
Corroles tetradentate
Crown ethers neutral primarily for alkali and alkaline earth metal cations
2,2,2-cryptand hexadentate primarily for alkali and alkaline earth metal cations
Cryptates neutral
Cyclopentadienyl (Cp) C
5
H
5
monoanionic Although monoanionic, by the nature of its occupied molecular orbitals, it is capable of acting as a tridentate ligand.
Diethylenetriamine (dien) C4H13N3 neutral tridentate related to TACN, but not constrained to facial complexation
Dimethylglyoximate (dmgH) monoanionic
1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA)        
Diethylenetriaminepentaacetic acid (DTPA) (pentetic acid)        
Ethylenediaminetetraacetic acid (EDTA) (edta4−) (OOC−CH2)2N−C2H4N(CH2-COO)2 tetraanionic hexadentate
Ethylenediaminetriacetate OOC−CH2NH−C2H4N(CH2-COO)2 trianionic pentadentate
Ethyleneglycolbis(oxyethylenenitrilo)tetraacetate (egta4−) (OOC−CH2)2N−C2H4O−C2H4O−C2H4N(CH2−COO)2 tetraanionic octodentate
Fura-2        
Glycinate (glycinato) NH2CH2COO monoanionic bidentate other α-amino acid anions are comparable (but chiral)
Heme dianionic tetradentate macrocyclic ligand
Iminodiacetic acid (IDA)     tridentate Used extensively to make radiotracers for scintigraphy by complexing the metastable radionuclide technetium-99m. For example, in cholescintigraphy, HIDA, BrIDA, PIPIDA, and DISIDA are used
Nicotianamine       Ubiquitous in higher plants
Nitrosyl NO+ cationic bent (1e) and linear (3e) bonding mode
Nitrilotriacetic acid (NTA)        
Oxo O2− dianion monodentate sometimes bridging
Pyrazine N2C4H4 neutral ditopic sometimes bridging
Scorpionate ligand tridentate
Sulfite OSO2−
2

SO2−
3
monoanionic monodentate ambidentate
2,2';6',2″-Terpyridine (terpy) NC5H4−C5H3N−C5H4N neutral tridentate meridional bonding only
Triazacyclononane (tacn) (C2H4)3(NR)3 neutral tridentate macrocyclic ligand
see also the N,N′,N″-trimethylated analogue
Tricyclohexylphosphine P(C6H11)3 or PCy3 neutral monodentate
Triethylenetetramine (trien) C6H18N4 neutral tetradentate
Trimethylphosphine P(CH3)3 neutral monodentate
Tris(o-tolyl)phosphine P(o-tolyl)3 neutral monodentate
Tris(2-aminoethyl)amine (tren) (NH2CH2CH2)3N neutral tetradentate
Tris(2-diphenylphosphineethyl)amine (np3) neutral tetradentate
Tropylium C
7
H+
7
cationic
Carbon dioxide CO2, others neutral see metal carbon dioxide complex
Phosphorus trifluoride (trifluorophosphorus) PF3 neutral

Ligand exchange

[edit]

A ligand exchange (also called ligand substitution) is a chemical reaction in which a ligand in a compound is replaced by another. Two general mechanisms are recognized: associative substitution or by dissociative substitution.

A generalized example of ligand association

Associative substitution closely resembles the SN2 mechanism in organic chemistry. A typically smaller ligand can attach to an unsaturated complex followed by loss of another ligand. Typically, the rate of the substitution is first order in entering ligand L and the unsaturated complex.[19]

A generalized example of ligand dissociation

Dissociative substitution is common for octahedral complexes. This pathway closely resembles the SN1 mechanism in organic chemistry. The identity of the entering ligand does not affect the rate.[19]

Ligand–protein binding database

[edit]

BioLiP[20] is a comprehensive ligand–protein interaction database, with the 3D structure of the ligand–protein interactions taken from the Protein Data Bank. MANORAA is a webserver for analyzing conserved and differential molecular interaction of the ligand in complex with protein structure homologs from the Protein Data Bank. It provides the linkage to protein targets such as its location in the biochemical pathways, SNPs and protein/RNA baseline expression in target organ.[21]

See also

[edit]

Explanatory notes

[edit]
  1. ^ The word ligand comes from Latin ligare, to bind/tie. It is pronounced either /ˈlɡənd/ or /ˈlɪɡənd/; both are very common.

References

[edit]
  1. ^ Burdge, J., & Overby, J. (2020). Chemistry – Atoms first (4th ed.). New York: McGraw Hill. ISBN 978-1260571349
  2. ^ Cotton, Frank Albert; Geoffrey Wilkinson; Carlos A. Murillo (1999). Advanced Inorganic Chemistry. Wiley-Interscience. p. 1355. ISBN 978-0471199571.
  3. ^ Miessler, Gary L.; Paul J. Fischer; Donald Arthur Tarr (2013). Inorganic Chemistry. Prentice Hall. p. 696. ISBN 978-0321811059.
  4. ^ Jackson, W. Gregory; Josephine A. McKeon; Silvia Cortez (1 October 2004). "Alfred Werner's Inorganic Counterparts of Racemic and Mesomeric Tartaric Acid: A Milestone Revisited". Inorganic Chemistry. 43 (20): 6249–6254. doi:10.1021/ic040042e. PMID 15446870.
  5. ^ Bowman-James, Kristin (2005). "Alfred Werner Revisited: The Coordination Chemistry of Anions". Accounts of Chemical Research. 38 (8): 671–678. doi:10.1021/ar040071t. PMID 16104690.
  6. ^ Hans Ludwig Schläfer and Günter Gliemann (1969). Basic Principles of Ligand Field Theory. London: Wiley-Interscience. ISBN 0471761001.
  7. ^ Miessler, Gary; Fischer, Paul J.; Tarr, Donald A. (2014). Inorganic Chemistry (5 ed.). Pearson. ISBN 978-0321811059.
  8. ^ Rasmussen, Seth C. (5 March 2015). "The 18-electron rule and electron counting in transition metal compounds: theory and application". ChemTexts. 1 (1): 10. doi:10.1007/s40828-015-0010-4. ISSN 2199-3793.
  9. ^ C. Elschenbroich (2006). Organometallics. VCH. ISBN 978-3-527-29390-2.
  10. ^ Green, M. L. H. (20 September 1995). "A new approach to the formal classification of covalent compounds of the elements". Journal of Organometallic Chemistry. 500 (1–2): 127–148. doi:10.1016/0022-328X(95)00508-N. ISSN 0022-328X.
  11. ^ "mlxz plots – Columbia University", Columbia University, New York.
  12. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 906. ISBN 978-0-08-037941-8.
  13. ^ Chemistry (IUPAC), The International Union of Pure and Applied. "IUPAC - η (eta or hapto) (H01881)". goldbook.iupac.org. doi:10.1351/goldbook.h01881. Retrieved 8 November 2023.
  14. ^ Chemistry (IUPAC), The International Union of Pure and Applied. "IUPAC - denticity (D01594)". goldbook.iupac.org. doi:10.1351/goldbook.d01594. Retrieved 8 November 2023.
  15. ^ Hartwig, John Frederick (2010). Organotransition metal chemistry: from bonding to catalysis. Sausalito (Calif.): University science books. ISBN 978-1-891389-53-5.
  16. ^ von Zelewsky, A. "Stereochemistry of Coordination Compounds" John Wiley: Chichester, 1995. ISBN 047195599X.
  17. ^ Sauvage, J.-P.; Collin, J.-P.; Chambron, J.-C.; Guillerez, S.; Coudret, C.; Balzani, V.; Barigelletti, F.; De Cola, L.; Flamigni, L. Chem. ReV. 1994, 94, 993-1019
  18. ^ Gavrilova, A. L.; Bosnich, B., "Principles of Mononucleating and Binucleating Ligand Design", Chem. Rev. 2004, volume 104, 349–383. doi:10.1021/cr020604g
  19. ^ a b Wilkins, Ralph G. (1991). Kinetics and mechanism of reactions of transition metal complexes (2. thoroughly rev. ed.). Weinheim: VCH. ISBN 978-1-56081-125-1.
  20. ^ BioLiP
  21. ^ Tanramluk D, Naripiyakul L, Akavipat R, Gong S, Charoensawan V (2016). "MANORAA (Mapping Analogous Nuclei Onto Residue And Affinity) for identifying protein-ligand fragment interaction, pathways and SNPs". Nucleic Acids Research. 44 (W1): W514-21. doi:10.1093/nar/gkw314. PMC 4987895. PMID 27131358.
[edit]