DescriptionDe Forest RJ6 Audion radio receiver.jpg
English: One of the first amplifying radio receivers, the De Forest Type RJ6 receiver made by the De Forest Radio Telephone and Telegraph Co., from an advertisement in a 1915 trade journal. It was a one-tube radio that used the Audion (triode), the first amplifiying vacuum tube, invented by Lee De Forest in 1906, both as a detector to rectify the radio signal, and as an audio amplifier. The Audion is mounted on the front panel so the operator can see if the filament is lit, and adjust the filament current by its brightness. The Audion is mounted upside down, with the delicate filament hanging down so it won't sag and touch the grid. The large dial on the right is the tuning, the multiposition switch in upper center adjusts the plate voltage, and the multiposition switch in lower center adjusts the filament current. The single Audion did not produce enough audio power to drive a loudspeaker, so the headphones at left are used for listening.
The advertising copy surrounding the picture read: "AUDION RECEIVING CABINET TYPE RJ6 Incorporating the Famous De Forest Audion Detector, The Most Efficient Receiving Set For Experimental And General Purposes Ever Offered For Less Than $500"
This media file is in the public domain in the United States. This applies to U.S. works where the copyright has expired, often because its first publication occurred prior to January 1, 1929, and if not then due to lack of notice or renewal. See this page for further explanation.
This image might not be in the public domain outside of the United States; this especially applies in the countries and areas that do not apply the rule of the shorter term for US works, such as Canada, Mainland China (not Hong Kong or Macao), Germany, Mexico, and Switzerland. The creator and year of publication are essential information and must be provided. See Wikipedia:Public domain and Wikipedia:Copyrights for more details.
Captions
Add a one-line explanation of what this file represents