An aligner is a major piece of equipment used in semiconductor device fabrication. Trending from upper left to lower right is the wafer-track system of a photolithographic cell that uses the "i-line" from a mercury arc lamp (wavelength 365 nm) to expose photoresist deposited on siliconwafers. Wafers are robotically loaded from a carrier at the left hand of the system and progressively are coated with photoresist, exposed to ultraviolet light, and "developed". The development step involves using a solvent to remove either the exposed (positive photoresist) or unexposed (negative photoresist) portions of the film. In the foreground is a black plastic box containing silicon wafers with a diameter of 6" (150 mm).
Photo taken at HP Labs by Alison Chaiken using a Nikon 995 camera. Note that the light in the room really is yellow!
Licensing
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
This licensing tag was added to this file as part of the GFDL licensing update.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue
Captions
Add a one-line explanation of what this file represents