Jump to content

Production planning

From Wikipedia, the free encyclopedia
(Redirected from Production Planning)
Role of Production Planning in the Production Cycle.

Production planning is the planning of production and manufacturing modules in a company or industry. It utilizes the resource allocation of activities of employees, materials and production capacity, in order to serve different customers.[1]

Different types of production methods, such as single item manufacturing, batch production, mass production, continuous production etc. have their own type of production planning. Production planning can be combined with production control into production planning and control, or it can be combined with enterprise resource planning.

Overview

[edit]

Production planning is the future of production. It can help in efficient manufacturing or setting up of a production site by facilitating required needs.[2] A production plan is made periodically for a specific time period, called the planning horizon. It can comprise the following activities:

  • Determination of the required product mix and factory load to satisfy customers needs.[3]
  • Matching the required level of production to the existing resources.[4]
  • Scheduling and choosing the actual work to be started in the manufacturing facility"[1]
  • Setting up and delivering production orders to production facilities.[5]

In order to develop production plans, the production planner or production planning department needs to work closely together with the marketing department and sales department. They can provide sales forecasts, or a listing of customer orders."[6] The "work is usually selected from a variety of product types which may require different resources and serve different customers. Therefore, the selection must optimize customer-independent performance measures such as cycle time and customer-dependent performance measures such as on-time delivery."[1]

A critical factor in production planning is "the accurate estimation of the productive capacity of available resources, yet this is one of the most difficult tasks to perform well".[7] Production planning should always take "into account material availability, resource availability and knowledge of future demand".[5]

History

[edit]
Planning department bulletin board, 1911.

Modern production planning methods and tools have been developed since late 19th century. Under Scientific Management, the work for each man or each machine is mapped out in advance (see image). The origin of production planning back goes another century. Kaplan (1986) summarized that "the demand for information for internal planning and control apparently arose in the first half of the 19th century when firms, such as textile mills and railroads, had to devise internal administrative procedures to coordinate the multiple processes involved in the performance of the basic activity (the conversion of raw materials into finished goods by textile mills, the transportation of passengers and freight by the railroads."[8]

Herrmann (1996) further describes the circumstances in which new methods for internal planning and control evolved: "The first factories were quite simple and relatively small. They produced a small number of products in large batches. Productivity gains came from using interchangeable parts to eliminate time-consuming fitting operations. Through the late 1800s, manufacturing firms were concerned with maximizing the productivity of the expensive equipment in the factory. Keeping utilization high was an important objective. Foremen ruled their shops, coordinating all of the activities needed for the limited number of products for which they were responsible. They hired operators, purchased materials, managed production, and delivered the product. They were experts with superior technical skills, and they (not a separate staff of clerks) planned production. Even as factories grew, they were just bigger, not more complex.[9]

About production planning Herrmann (1996) recounts that "production scheduling started simply also. Schedules, when used at all, listed only when work on an order should begin or when the order is due. They didn't provide any information about how long the total order should take or about the time required for individual operations ..."[9]

In 1923 Industrial Management cited a Mr. Owens who had observed: "Production planning is rapidly becoming one of the most vital necessities of management. It is true that every establishment, no matter how large or how small has production planning in some form; but a large percentage of these do not have planning that makes for an even flow of material, and a minimum amount of money tied up in inventories."[10]

Topics

[edit]

Types of planning

[edit]

Different types of production planning can be applied:

Related kind of planning in organizations

Production control

[edit]

Production control is the activity of controlling the workflow in the production. It is partly complementary to production planning.

See also

[edit]

References

[edit]
  1. ^ a b c Fargher, Hugh E., and Richard A. Smith. "Method and system for production planning." U.S. Patent No. 5,586,021. 17 Dec. 1996.
  2. ^ Telsang, Martand. Industrial engineering and production management. S. Chand, 2006.
  3. ^ Hung, Yi-Feng, and Robert C. Leachman. "A production planning methodology for semiconductor manufacturing based on iterative simulation and linear programming calculations." Semiconductor Manufacturing, IEEE Transactions on 9.2 (1996): 257-269.
  4. ^ Boucher, Thomas O. "The choice of cost parameters in machining cost models." The Engineering Economist 32.3 (1987): 217-230.
  5. ^ a b Bertrand, J. W. M., and W. G. M. M. Rutten. "Evaluation of three production planning procedures for the use of recipe flexibility." European journal of operational research 115.1 (1999): 179-194.
  6. ^ August-Wilhelm Scheer (1984) Scheer, A-W. "Production control and information systems." Methods and Tools for Computer Integrated Manufacturing. Springer Berlin Heidelberg, 1984. 138-178.
  7. ^ Solberg, James J. "Capacity planning with a stochastic workflow model." AIIE Transactions 13.2 (1981): 116-122.
  8. ^ Kaplan, Robert S. "The evolution of management accounting Archived 2014-12-22 at the Wayback Machine," The Accounting Review, Vol 14, No 3. July 1986.
  9. ^ a b Herrmann, Jeffrey W. "A history of production scheduling Archived 2014-11-29 at the Wayback Machine." Handbook of Production Scheduling. Springer US, 2006. 1-22.
  10. ^ John Robertson Dunlap, Arthur Van Vlissingen, John Michael Carmody. eds. Industrial Management, Vol. 65-66, p. 182