Jump to content

Annie 30

From Wikipedia, the free encyclopedia

Annie 30
Development
DesignerChuck Paine
LocationUnited States
Year1980
No. built16
Builder(s)Morris Yachts
NameAnnie 30
Boat
Displacement11,027 lb (5,002 kg)
Draft4.50 ft (1.37 m)
Hull
TypeMonohull
ConstructionFiberglass
LOA30.00 ft (9.14 m)
LWL24.50 ft (7.47 m)
Beam9.50 ft (2.90 m)
Engine typeWesterbeke diesel engine
Hull appendages
Keel/board typelong keel
Rudder(s)transom-mounted, keel-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height39.00 ft (11.89 m)
J foretriangle base12.67 ft (3.86 m)
P mainsail luff33.75 ft (10.29 m)
E mainsail foot12.50 ft (3.81 m)
Sails
SailplanMasthead sloop
Mainsail area210.94 sq ft (19.597 m2)
Jib/genoa area247.07 sq ft (22.954 m2)
Total sail area458.00 sq ft (42.550 m2)

The Annie 30, often just called Annie, is an American sailboat that was designed by Chuck Paine as an offshore cruiser and first built in 1980.[1][2][3]

The Annie design was later developed into the Annie 2 by Paine and offered as plans for custom building or amateur construction.[4]

Production

[edit]

The design was built by Morris Yachts in Bass Harbor, Maine, United States. The company built 16 examples of the design, starting in 1980, but it is now out of production.[1][3][5]

Design

[edit]

The Annie is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a spooned raked stem, a sloped transom, a transom-hung and keel-mounted rudder controlled by a tiller and a fixed long keel, with the forefoot cutaway. It displaces 11,027 lb (5,002 kg).[1][3]

The boat has a draft of 4.50 ft (1.37 m) with the standard keel fitted.[1]

The boat is fitted with a Westerbeke two-cylinder diesel engine for docking and maneuvering. The fuel tank holds 18 U.S. gallons (68 L; 15 imp gal) and the fresh water tank has a capacity of 37 U.S. gallons (140 L; 31 imp gal).[3]

The cabin has two design interior versions, both using teak trim. One has a forward head, just aft of the "V"-berth, while the other has an aft head, in place of the chart table and a dresser in the forward cabin. The forward cabin has a privacy curtain. The galley is located aft, on the starboard side, just ahead of the companionway stairs and has an optional two-burner stove. A shower is also optional and uses freshwater engine cooling to heat the water. Ventilation is via nine opening ports.[3]

The genoa has tracks and the mainsheet traveler is mounted aft of the cockpit.[3]

Operational history

[edit]

In a review Richard Sherwood described the design, "Annie is a heavy-displacement boat, but she has a very tall rig and much greater sail area in the jib than older boats. In addition, freeboard is low, the bow is sharp, and the keel is quite narrow. The forefoot is cut away. With the long keel and the heavy displacement, Annie should track well. The tall rig will assist in light air."[3]

See also

[edit]

Similar sailboats

References

[edit]
  1. ^ a b c d Browning, Randy (2019). "Annie 30 sailboat specifications and details". sailboatdata.com. Archived from the original on 9 April 2022. Retrieved 14 April 2019.
  2. ^ Browning, Randy (2019). "C. W. (Chuck) Paine". sailboatdata.com. Archived from the original on 9 April 2022. Retrieved 14 April 2019.
  3. ^ a b c d e f g Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 206-207. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
  4. ^ Paine, Chuck (2019). "Annie 2 – A 30′ Offshore Voyager". www.chuckpaine.com. Archived from the original on 9 April 2022. Retrieved 14 April 2019.
  5. ^ Browning, Randy (2019). "Morris Yachts". sailboatdata.com. Archived from the original on 9 April 2022. Retrieved 14 April 2019.