Jump to content

Condamine Power Station

Coordinates: 26°39′49″S 150°15′53″E / 26.66361°S 150.26472°E / -26.66361; 150.26472
From Wikipedia, the free encyclopedia

Condamine Power Station
Map
CountryAustralia
LocationMiles, Queensland
Coordinates26°39′49″S 150°15′53″E / 26.66361°S 150.26472°E / -26.66361; 150.26472
StatusOperational
Commission dateJune 2010
OwnerQGC
Thermal power station
Primary fuelCoal seam gas
Turbine technologySteam turbine and gas turbine
Power generation
Units operational3
Nameplate capacity140 MW

Condamine Power Station is a 140 MW combined cycle power station near Miles on the western Darling Downs in Queensland, Australia. The station is located 8 kilometres (5.0 mi) east of Miles on the south side of the Warrego Highway. The Condamine Power Station is owned by QGC Limited, a subsidiary of Royal Dutch Shell. Commissioned in June 2009, it has been claimed to be the world’s first combined-cycle power station entirely fired by untreated coal seam gas direct from the gasfield and Australia's first steam turbine condenser cooled by coal seam methane wastewater. However, the Townsville Power Station at Yabulu was commissioned earlier in February 2005 after being converted from a peak load to a combined cycle configuration but was designed to consume only treated coal seam gas.

Construction began on 19 October 2007. It was completed in mid-2010. The EPC contractor was Austrian Energy and Environment with the gas turbines supplied by Siemens. Parsons Brinckerhoff were the owner's engineer for construction. The gas turbine with dispatchable unit ID (DUID) "CPSA" began bidding into the National Electricity Market on 1 June 2009, with the first generation made available to the market on 10 July 2009.[1] The Columboola Switching Station, which connects Condamine Power Station with the Chinchilla-to-Roma 132-kilovolt transmission line, was completed in October 2008.

AGL Energy had an option to acquire the Condamine Power Station.[2] This option was not exercised[3] and expired on 14 April 2009.[4]

The power station has an installed capacity of 140 MW. Electricity is generated by two gas turbines and one steam turbine from coal seam gas.[5] The two gas turbines are Siemens SGT-800 models and the steam turbine is a Siemens SST-400.[6][7][8] According to the NEMMCO Applicants list, the registered capacity of the gas turbine is 87.4 MW (2 x 43.7 MW) and the registered capacity of the steam turbine is 57.1 MW.[9]

The gas reserves are extracted from the Berwyndale South Gasfield.[10] Building the plant directly on top of the gas source will provide some of the cheapest gas-fired electricity to the National Electricity Market.

See also

[edit]

References

[edit]
  1. ^ NEMWeb AEMO. 10 July 2009.
  2. ^ AGL Fact Sheet Archived 14 September 2009 at the Wayback Machine AGL. Accessed on 9 March 2009.
  3. ^ ASX Announcement by AGL. AGL.
  4. ^ AGL Half Yearly Report Archived 19 November 2010 at the Wayback Machine. AGL. Accessed on 9 March 2009.
  5. ^ Coal company to build western Downs power station. ABC News. 27 April 2007. Accessed 17 September 2007.
  6. ^ Australian Company Profile. Archived 12 September 2009 at the Wayback Machine Austrian Energy & Environment Australia. Accessed on 4 January 2009.
  7. ^ Siemens SST-400 Archived 15 May 2008 at the Wayback Machine Siemens.
  8. ^ Siemens SGT-800 Archived 20 August 2008 at the Wayback Machine Siemens.
  9. ^ NEMMCO Registration and Exemptions Lists.[permanent dead link] NEMMCO. 23 December 2008. Accessed on 4 January 2009.
  10. ^ QGC aims to expand gas field development. The Sydney Morning Herald. 4 August 2006. Accessed 17 September 2007.