Ramsey Fill
It has been suggested that this article be merged with Waltz & Reece Cut, Armstrong Cut, Bradbury Fill, Colby Cut, Jones Cut, Vail Fill, Pequest Fill, Lubber Run Fill, Slateford Junction and Wharton Fill. (Discuss) Proposed since September 2024. |
Ramsey Fill is one of the fills (embankments) on the Lackawanna Cut-Off railroad line in northwest New Jersey. Located between miles 60.4 and 60.9 in Frelinghuysen Township, the fill was constructed between 1908 and 1911 by contractor Hyde, McFarlan & Burke. The .53-mile (0.85 km) fill has an average height of 21 feet (6.5 m), and a maximum height of 80 feet (24.6 m). It was created with 805,481 cubic yards (615,834 m3) of fill material obtained by blasting with dynamite or other methods.
Ramsey Fill is on a tangent (straight) section of track, permitting 80 mph (129 km/h). Johnsonburg Station was located about midway along the fill, just east of Armstrong Cut.[1]
It is named for Stewart W. Ramsey, who owned most of the land acquired to build it.[2]
References
[edit]- ^ Taber, Thomas Townsend; Taber, Thomas Townsend III (1980). The Delaware, Lackawanna & Western Railroad in the Twentieth Century 1, p. 35. Muncy, PA: Privately printed. ISBN 0-9603398-2-5.
- ^ 1906 Survey Map of the Delaware Valley Cut-Off, September 1, 1906.