Jump to content

S-V

From Wikipedia, the free encyclopedia
S-V
S-V stage on top of the S-IV
ManufacturerConvair
Country of originUnited States
Used onSaturn I (stage 3)
General characteristics
Height9.14 m (30.0 ft)
Diameter3.05 m (10.0 ft)
Gross mass15,600 kg (34,400 lb)
Propellant mass13,604 kg (30,000 lb)
Empty mass1,996 kg (4,400 lb)
Associated stages
FamilySaturn
DerivativesCentaur
Launch history
StatusRetired
Total launches4
Successes
(stage only)
4
Failed0
First flightOctober 27, 1961
Last flightMarch 28, 1963
S-V
Powered by2 RL-10 engines
Maximum thrust133.45 kN (30,000 lbf)
Specific impulse425 s (4.17 km/s)
Burn time425 s
PropellantLH2 / LOX

The S-V (pronounced "S-five") was the third stage of the Saturn I rocket. It was built by Convair. It was designed to use two RL-10A-1 engines fueled by liquid hydrogen (LH2) and liquid oxygen (LOX) in tanks utilizing a common bulkhead to separate the propellants.

History

[edit]

Convair Astronautics was awarded a contract to deliver the S-V stage for the Saturn I. The stage was intended to boost lift capacity for U.S. military launches in the 1960s. The S-V would ultimately fly as the third stage on early launches of the Saturn I. Convair delivered two S-V stages in February 1961[1] with one being flown on SA-1 attached to an also inert S-IV, the second was used for dynamic testing of the complete Saturn I before being later flown. In May 1961 NASA eliminated the requirement for all Saturn I launches to be flown with S-V's by flying in a two-stage only version. Despite this, the stage would fly four times in total.[2] With the introduction of the Saturn IB and the needs of the military fulfilled on other launches, all further launches would be on either the Saturn IB or Saturn V, neither of which used the S-V. A version of this stage was also used on the Atlas-LV3C as the Centaur, modern derivatives of which are still flown today, making it the only Saturn rocket stage still currently operating.

Flight history

[edit]

Ultimately, the S-V would go on to fly four times between 1961 and 1964. Each of which were flown on suborbital test flights of the Saturn I. Because of the suborbital nature of these flights, each S-V was filled with water to act as ballast, making the stage inert. The water was released in space twice for Project Highwater. Modern derivatives of the stage are still in use today on the Atlas V and the Vulcan Centaur.

Flight Number Launch date

(UTC)

Notes
SA-1 October 27, 1961

15:06:04

First test suborbital flight. Apogee: 136.5 km. Inactive S-IV and S-V stages.
SA-2 April 25, 1962

14:00:34

Second suborbital test flight. 86,000 kg water released at apogee of 145 km. Inactive S-IV and S-V stages.
SA-3 November 16, 1962

17:45:02

Third suborbital test flight. 86,000 kg water released at apogee of 167 km. Inactive S-IV and S-V stages.
SA-4 March 28, 1963

20:11:55

Fourth suborbital test flight. Apogee: 129 km. Inactive S-IV and S-V stages.

References

[edit]
  1. ^ "Saturn Illustrated Chronology - Part 2". history.nasa.gov. 15 May 1965. Retrieved 2020-09-16.
  2. ^ "Saturn-1 (Block 1) (Saturn-I)". Gunter's Space Page. Retrieved 2020-09-16.